Condensation on Windows in Winter: Ontario Homeowner's Guide
ASADS Home Inspection · 2026-04-13
Why Does Condensation Form on Windows in Winter?
Condensation forms when warm, humid indoor air contacts a cold surface — like a window pane in winter. When the surface temperature drops below the dew point of the air inside, moisture precipitates out as liquid water. This is the same reason a cold glass sweats on a humid summer day.
In Ontario winters, outdoor temperatures regularly drop to -10°C to -25°C, making window surfaces significantly colder than the interior air — especially on older single-pane or poorly sealed double-pane windows. The result is the condensation many homeowners see on their windows on cold mornings.
When Is Window Condensation Normal?
Occasional light condensation on windows during extreme cold snaps — particularly in kitchens and bathrooms where cooking and bathing add moisture to the air — is normal and not cause for concern. It typically evaporates as indoor temperatures rise or as the window warms up.
Condensation that forms on the outside of the window is also normal and harmless — it simply means the exterior glass is colder than the outdoor dew point, which happens on mild, humid days.
When Is Window Condensation a Problem?
Condensation becomes a concern when:
- It's persistent every cold morning — suggests chronically high indoor relative humidity, usually above 50%. This level of humidity supports mold growth on any cool surface, not just windows.
- It's pooling on the sill and running down the wall — sustained water on wood window frames and drywall leads to rot, paint failure, and mold. If you're seeing dark staining on window frames or sills, mold is likely already present.
- It's forming between the panes of a double-pane window — this means the sealed unit has failed. The gas fill has escaped, condensation forms in the cavity, and the window's insulating value is compromised. The seal cannot be repaired — the glass unit must be replaced.
- It's appearing on walls near exterior corners — this can indicate thermal bridging through the framing, inadequate insulation, or air leakage — all of which create cold spots where condensation and mold form behind finished surfaces.
Common Causes of Excessive Window Condensation in Ontario Homes
- Inadequate ventilation: Bathroom and kitchen exhaust fans that don't move enough air — or that vent into the attic instead of outside — allow moisture to accumulate indoors all winter.
- New construction or recent renovation: New homes and fresh concrete, drywall, and lumber release significant moisture for 1–2 years. This is normal but requires active ventilation management (HRV use, spot fans).
- Overhumidification: Whole-home humidifiers set too high for the outdoor temperature will drive condensation. Ontario winters require reducing humidity as outdoor temperatures fall — generally below 35% RH at -15°C outdoors.
- Poorly sealed air vapour barrier: Air leaks in the building envelope allow warm, moist indoor air to reach cold exterior surfaces, causing condensation inside wall cavities where it's invisible and very damaging.
- Older single or low-quality double-pane windows: Windows with higher U-values (lower insulating value) have colder interior surfaces and condense more aggressively.
How to Reduce Window Condensation
- Use bathroom exhaust fans during and for 20–30 minutes after every shower
- Run kitchen range hood when cooking
- Set your humidifier based on outdoor temperature (most modern humidistats have an outdoor temperature setting)
- Open windows briefly on mild days to flush moisture-laden air
- Run your HRV (heat recovery ventilator) continuously in winter if you have one
- Keep furniture away from exterior walls to allow air circulation
- Check that all exhaust fans actually vent to the exterior (a common deficiency found during home inspections)
When to Get a Home Inspection for Condensation Issues
If you're seeing persistent window condensation combined with any of the following, it's worth having a certified inspector assess the property:
- Musty or earthy smell in any room
- Dark staining on window frames, sills, or drywall near exterior walls
- Peeling paint or wallpaper on exterior walls
- Visible mold anywhere in the home
- Allergy symptoms that improve when you're away from the house
A mold inspection with air quality sampling will tell you whether airborne spore counts are elevated — often revealing hidden mold in walls and attics that visible inspection alone can't find. Our inspectors serve all of Ontario including Toronto, Hamilton, Mississauga, Kitchener, and surrounding areas.