How to Test for Asbestos in Your Home (Ontario Guide)
ASADS Home Inspection · 2026-11-05
You cannot tell whether a material contains asbestos by looking at it. The only way to know is to have a sample analysed by a laboratory. This guide explains how asbestos testing works in an Ontario home, step by step, so you know what to expect before a renovation or a purchase.
Step 1: Know Which Homes and Materials to Suspect
Asbestos was used in many Canadian building products until it was banned in 2018, and it is most common in homes built or renovated before about 1990. Materials worth checking include:
- popcorn and stipple ceilings, and textured wall finishes
- vinyl floor tiles (often 9 x 9 inch) and the black adhesive under them
- drywall joint compound and plaster
- vermiculite attic insulation
- pipe and boiler insulation, duct wrap and tape
- cement siding, roofing and soffits
See asbestos materials in Ontario homes for where each one turns up.
Step 2: Do Not Disturb the Material
Asbestos is a health risk when fibres are released into the air, which happens when a material is drilled, sanded, scraped, cut or broken. Until a material has been tested, treat it as if it contains asbestos and leave it alone.
Step 3: Sampling
A small piece of each suspect material is removed with wet methods and protective equipment, sealed in a labelled bag, and the spot is patched so fibres are not released. Each different material, and each layer of a floor or ceiling, is sampled separately because one can contain asbestos when another does not. Taking samples yourself risks releasing fibres; a trained inspector takes them safely and records exactly where each came from.
Step 4: Laboratory Analysis
Samples go to an accredited laboratory, which identifies asbestos fibres under a microscope (polarized light microscopy for bulk materials) and reports whether asbestos is present and roughly how much. Standard results usually take about a week, and faster turnaround is available from most labs at a higher cost.
When Air Testing Helps
Bulk sampling tells you what the materials contain. Air testing measures fibres in the air, and is mainly useful after damage or a renovation to check whether fibres were released, or after asbestos removal to confirm the area is clean. It does not replace testing the materials themselves.
Home Test Kits
Mail-in kits send a sample you collect to a lab. They can work for a single, easy-to-reach material, but you take on the risk of disturbing it, and a kit does not tell you which other materials need testing. See asbestos test kit vs professional testing.
What the Results Mean
- Not detected: the material can be renovated normally.
- Asbestos detected, material intact: it can often be left in place or covered, as long as the work will not disturb it.
- Asbestos detected and the work will disturb it: it must be removed or controlled by trained workers under Ontario's rules before the work goes ahead.
Booking Asbestos Testing
ASADS takes samples safely and sends them to an accredited laboratory, with a written report you can give your contractor. See our asbestos testing service, or call (647) 801-9311.