Canadian Home Inspection Guide: What to Expect, What's Covered, and How to Choose an Inspector

ASADS Team · 2026-04-13

What Is a Canadian Home Inspection?

A home inspection is a professional, visual assessment of a property's physical condition. An inspector examines the accessible components of a home — from foundation to roof — and produces a written report documenting findings, deficiencies, and recommendations.

In Canada, home inspections are almost always completed as part of a conditional offer on a resale property. The buyer hires the inspector, the inspection is completed during the condition period (typically 3–5 business days), and the buyer then decides whether to proceed, negotiate, or walk away with the deposit returned.

Home Inspection Licensing in Canada: Provincial Variation

Canada has no national licensing standard for home inspectors. Regulation varies significantly by province:

The absence of mandatory licensing in Ontario makes credentials more important, not less. When there's no regulatory floor, any person can call themselves a home inspector. Certification from recognized bodies provides the quality assurance that licensing would otherwise require.

What a Home Inspection Covers in Canada

A standard Canadian home inspection, following InterNACHI or Canadian Association of Home and Property Inspectors (CAHPI) standards, covers nine major systems:

1. Roofing System

Shingle condition and estimated remaining life, flashings at chimneys, vents, valleys and penetrations, gutters, downspouts, and soffits. Flat roofing where applicable.

2. Exterior

Cladding condition (brick, vinyl, stucco, wood), grading and drainage away from foundation, driveways, walkways, decks, porches, windows and doors, garage doors.

3. Foundation and Structure

Visible foundation (poured concrete, block, stone), basement walls for cracks and water staining, floor joists and beams, evidence of movement or settlement, sump pump and drainage tile.

4. Electrical System

Electrical panel capacity and condition, wiring type throughout (copper vs aluminum vs knob-and-tube), grounding, GFCI protection in wet areas, visible outlets and switches. In Ontario, aluminum wiring (1965–1978) and knob-and-tube (pre-1950) are common insurance-impacting findings.

5. Plumbing System

Pipe materials throughout (copper, Kitec, galvanized steel, poly-B, PVC), water heater age and condition, all fixtures tested for flow and drainage, shutoff valves, water pressure. Kitec plumbing (1995–2007 Ontario builds) is an insurance and liability concern.

6. Heating and Cooling (HVAC)

Furnace age, condition, and heat exchanger integrity (CO risk if cracked), air conditioner condition and approximate age, ductwork, HRV/ERV ventilation systems, fireplaces and wood stoves (visual — WETT certification is a separate inspection).

7. Insulation and Ventilation

Attic insulation type and depth, attic ventilation balance, exhaust fan termination points, vapour barriers, basement insulation, and energy efficiency observations.

8. Interior

Ceilings, walls, floors for staining, damage or deformation, window operation and seals, door function, stairways, railings, smoke and CO detector presence.

9. Garage

Structural condition, door operation and auto-reverse function, firewall integrity between garage and living space.

What's NOT Included in a Standard Canadian Home Inspection

How to Choose a Home Inspector in Canada

In provinces without mandatory licensing (including Ontario), focus on these:

Home Inspection Costs Across Canada (2025–2026)

Prices are slightly higher in Vancouver and Toronto compared to smaller markets. The difference between a $280 inspector and a $480 inspector is not worth optimizing on a $700,000–$1.5M purchase.

Understanding Your Home Inspection Report

Inspection reports list deficiencies — every home has them. Focus on severity:

Always attend the inspection. The walkthrough with the inspector at the end is more valuable than the written report alone. Ask: "What are the two or three things that actually concern you?"

Book a Home Inspection in Ontario

ASADS Home Inspection is InterNACHI certified, carries full E&O insurance, and includes thermal imaging in every inspection at no extra charge. We serve the GTA and surrounding Ontario with same-day reports and next-day availability.

Call (647) 801-9311 or book your inspection online. For a full list of service areas, see our Ontario locations page.