Coliform in Well Water: What Your Ontario Test Result Means

ASADS Home Inspection · 2026-10-31

If your private well test came back showing coliform bacteria, the result is telling you something specific: surface water or soil is probably getting into your water supply. It is common, it is usually fixable, and the next steps are well established. This guide explains what the result means, what to do first, and what a standard bacteria test does not check.

What Are Coliform Bacteria?

Coliforms are a large group of bacteria found in soil, on plants and in the gut of people and animals. Most are not harmful themselves. Labs test for them because they are an indicator: if coliforms are in your well water, there is a pathway for contamination, and harmful bacteria, viruses or parasites could use the same pathway.

A typical private well bacteria test reports two things:

Ontario's drinking water standard for both is zero per 100 mL. Any detectable count is above the standard.

Total Coliform Found, No E. coli

This is the most common positive result. It usually points to a problem near the top of the well: a cracked or loose well cap, a damaged casing, surface water pooling around the wellhead, or recent work on the well or plumbing. It can also follow heavy rain or snowmelt.

E. coli Found

E. coli means the water is contaminated with waste and is not safe to drink without treatment. Stop drinking it untreated straight away and contact your local public health unit for advice. Look for nearby sources: a septic system, manure, a pet run or a flooded area. Disinfection alone will not hold if the source is still there, so a well contractor should check the well's construction and location.

How Often Should You Test a Private Well?

Public Health Ontario recommends testing private well water for bacteria three times a year: in spring, late summer and fall. Test again any time:

What the Free Bacteria Test Does Not Check

Ontario offers free bacteria testing of private well water through Public Health Ontario's laboratory, with sample bottles available from public health units and drop-off locations. That test checks only total coliforms and E. coli.

It does not test for chemicals. Depending on the area and the well, those can include nitrates (near farmland or septic systems), arsenic, uranium, fluoride, lead (from older plumbing), sodium and hardness. Chemical testing is done by an accredited private laboratory and usually needs to be done less often than bacteria testing, for example when you buy the home and every few years after that.

Buying a Home With a Well

For buyers, a single clear bacteria result is a snapshot. Ask the seller for past results, check when the well was built and last serviced, and consider both a bacteria test and a chemical panel before your conditions expire. A home inspection also looks at the wellhead, the pressure tank and any treatment equipment.

Getting Your Well Tested

ASADS collects well water samples using proper sterile procedure and sends them to an accredited laboratory, including chemical tests such as nitrates and arsenic that the free test does not cover. See our well water testing page for what is included, or call (647) 801-9311. Buying a home? Add it to a pre-purchase home inspection.