How to Test Air Quality in Your Home: Monitors vs Lab Testing
ASADS Home Inspection · 2026-10-31
Stuffy rooms, headaches that fade when you leave the house, condensation on windows or a smell you can't place are all reasons people start asking how to test the air at home. You can learn a lot yourself with the right tools, as long as you know what each tool can and cannot measure.
Step 1: Use a Home Air Quality Monitor
A consumer air quality monitor is the easiest place to start. Most measure some of the following:
- Carbon dioxide (CO2): a good guide to ventilation. Outdoor air is roughly 400 to 450 ppm. Health Canada's residential guideline is a 24-hour average of 1,000 ppm; readings well above that in bedrooms usually mean not enough fresh air.
- Fine particles (PM2.5): rise with cooking, candles, wood smoke and wildfire smoke.
- Total VOCs (TVOC): a rough signal for chemicals from paint, cleaners, new furniture and flooring. Consumer sensors can't tell you which chemical, so treat the number as a trend, not a diagnosis.
- Humidity: high humidity feeds mold and dust mites; very low humidity dries out skin and airways. Watch it room by room, especially in basements.
Leave the monitor in each room for a few days and note when readings spike. Patterns such as CO2 climbing overnight or humidity staying high in the basement point to the fix.
Step 2: Problems That Need Their Own Test
- Carbon monoxide: a general air monitor is not a substitute for a CO alarm. Ontario requires CO alarms in homes with a fuel-burning appliance, fireplace or attached garage.
- Radon: you can't smell or see it, and air quality monitors don't measure it. Health Canada recommends a long-term test of at least three months, ideally in fall and winter. See radon levels explained.
- Mold: monitors don't detect mold. Petri-dish kits have limits too; see mold test kit vs professional testing.
- Specific chemicals such as formaldehyde: these need sampling and laboratory analysis to identify and measure.
Step 3: Simple Fixes to Try First
- Run bathroom and kitchen exhaust fans, and check they vent outside, not into the attic.
- Make sure the HRV or ERV, if you have one, is running and its filters are clean.
- Change furnace filters on schedule.
- Use a dehumidifier in damp basements.
- Air out rooms after painting, renovating or bringing in new furniture.
When to Call a Professional
Professional indoor air quality testing makes sense when symptoms continue after the simple fixes, when you suspect hidden mold, after a flood or major renovation, when buying a home, or when you need written results for a landlord, employer or insurer. A professional assessment combines an inspection of the home's moisture and ventilation with air samples analysed by an accredited laboratory.
For what inspectors look for in Ontario homes, see our guide to home indoor air quality in Ontario. To book, see air quality testing or call (647) 801-9311.