What Does a Home Inspection Include? Complete Ontario Checklist
ASADS Home Inspection · 2026-04-13
What Is a Home Inspection?
A home inspection is a professional visual examination of a property's major systems and components, performed by a certified inspector. In Ontario, home inspectors are regulated under the Home Inspection Act, 2017, and must meet education, licensing, and insurance requirements before they can inspect a property for a client.
A standard inspection covers every accessible system: from the roof to the foundation, and everything in between. The goal is to identify existing defects, safety concerns, and maintenance issues — and provide the buyer with a clear, written report before they complete the purchase.
Complete Home Inspection Checklist — What Gets Inspected
1. Roof
- Shingle condition, age, and remaining life
- Flashing at chimneys, skylights, and roof-to-wall transitions
- Gutters, downspouts, and drainage direction
- Fascia, soffits, and eaves ventilation
- Chimney cap, crown, and mortar condition
2. Exterior
- Cladding condition (brick, siding, stucco, EIFS)
- Foundation walls — visible cracks, efflorescence, settlement
- Grading and drainage away from the house
- Walkways, steps, and decks
- Garage structure, door operation, and auto-reverse safety
- Window and door frames, seals, and caulking
3. Attic
- Insulation type, depth, and coverage (R-value estimate)
- Ventilation — passive vents, baffles, ridge vents
- Roof deck condition — staining, rot, delamination
- Signs of moisture, mold, or ice damming
- Bathroom and kitchen exhaust fans (are they venting outside or into attic?)
4. Electrical System
- Main electrical panel — brand, amperage, breaker condition
- Wiring type — copper, aluminum, knob and tube, or mixed
- GFCI protection in kitchens, bathrooms, garages, and outdoors
- Outlet functionality and grounding
- Visible wiring in basement and attic
- Smoke and carbon monoxide detector presence
5. Plumbing
- Water supply pipe material (copper, galvanized, PEX, CPVC)
- Drain and waste pipe material (ABS, PVC, cast iron, clay)
- Water heater — age, condition, temperature and pressure relief valve
- Visible leaks, water staining, and corrosion
- Water pressure and flow at fixtures
- Sump pump presence and operation
6. Heating & Cooling (HVAC)
- Furnace age, condition, and heat exchanger (visible portion)
- Air conditioner condition and approximate age
- Ductwork — distribution, condition, insulation
- Thermostat operation
- Flue venting and combustion air supply
- Fireplaces and wood stoves (visual inspection; WETT inspection is separate)
7. Basement & Foundation
- Foundation wall type and condition (poured concrete, block, stone)
- Active or historic water infiltration
- Efflorescence, staining, and crack patterns
- Floor drain functionality
- Beam and post condition
- Insulation and vapour barrier where present
8. Interior
- Walls, ceilings, and floors — visible defects, moisture staining, settlement
- Windows — operation, seals, condensation between panes
- Doors — operation, weatherstripping, and fire ratings on garage doors
- Stairs and railings — structural condition and safety
- Kitchen — cabinet condition, appliances (if included in sale)
- Bathrooms — tile, caulking, exhaust fans, fixture operation
What Is NOT Included in a Standard Home Inspection?
A standard inspection is visual only — inspectors do not open walls, test behind finished surfaces, or operate systems that appear unsafe. The following are typically not included and require separate specialists:
- Asbestos testing — requires lab sampling of suspect materials
- Mold testing — air quality sampling or surface testing by certified inspector
- Radon testing — requires a long-term (minimum 48-hour) detector
- WETT inspection — wood energy technology transfer inspection of fireplaces and wood stoves
- Sewer scope — camera inspection of underground drain lines
- Well water testing — laboratory testing of potable water quality
- Pest inspection — for wood-destroying insects and rodents
- Environmental testing — lead paint, underground oil tanks, urea formaldehyde insulation
ASADS offers many of these as add-on services during the same visit — including asbestos testing, mold inspection, radon testing, and WETT inspection.
How Long Does a Home Inspection Take?
Inspection time depends on the size, age, and condition of the property:
- Condo or apartment (under 1,000 sq ft): 1–1.5 hours
- Townhouse or semi-detached (1,000–1,800 sq ft): 1.5–2.5 hours
- Standard detached home (1,800–2,500 sq ft): 2–3 hours
- Larger home (2,500–4,000 sq ft): 3–4 hours
- Older homes (pre-1970): Add 30–60 minutes for knob and tube wiring, galvanized plumbing, stone foundations, and other era-specific concerns
Questions to Ask Your Home Inspector
- What are the most urgent findings — what needs immediate attention?
- What maintenance should I budget for in the next 1–3 years?
- How old is the furnace, water heater, and roof? What's their remaining life?
- Is there any evidence of past water infiltration in the basement or attic?
- Are there any safety concerns I should address before moving in?
- Is there anything that warrants a specialist's evaluation (structural engineer, electrician, etc.)?
At ASADS, we walk you through the home at the end of every inspection — not just hand you a report. You should leave with a clear understanding of every finding and what it means for your purchase decision.