Home Inspection Red Flags: 15 Issues That Should Worry Buyers
ASADS Team · 2026-04-13
What Makes a Home Inspection Finding a "Red Flag"?
A home inspection report lists all observed deficiencies — from missing caulk to structural movement. Most findings are minor maintenance items that cost hundreds to address. Red flags are different: they signal potential safety hazards, expensive repairs ($5,000–$100,000+), insurance problems, or issues that indicate larger hidden defects.
Here are the 15 home inspection red flags ASADS inspectors see most frequently in Ontario — and what they mean for buyers.
1. Foundation Cracks (Especially Horizontal)
Not all foundation cracks are equal. Hairline vertical cracks from concrete curing are usually minor. Diagonal cracks from settlement require monitoring. Horizontal cracks in poured concrete or block foundations are serious — they indicate lateral soil pressure that can lead to wall failure. Stair-step cracks in block foundations also signal significant movement. Any crack wider than 6mm or showing signs of water infiltration requires a structural engineer's assessment before purchase.
2. Active Water Infiltration in the Basement
Water staining on walls and floors can be historic and resolved, or active and ongoing. ASADS uses moisture meters and thermal imaging to distinguish between old and current moisture. Active water in the basement signals failed waterproofing, grading problems, or failed weeping tile — repairs that range from $3,000 (exterior grading) to $30,000+ (full exterior waterproofing with new weeping tile).
3. Knob-and-Tube Wiring
Found in Ontario homes built before the 1950s, knob-and-tube (K&T) wiring is ungrounded, lacks insulation ratings for modern usage, and poses fire risks if improperly extended or covered with insulation. Most home insurance companies will not insure a home with active K&T wiring, or will charge significantly higher premiums. Full rewiring costs $8,000–$20,000+ for a detached home. Learn more about K&T wiring in Ontario homes.
4. Aluminum Wiring
Common in Ontario homes built 1965–1978, aluminum branch circuit wiring expands and contracts more than copper, causing loose connections at outlets and switches that create arcing and fire hazards. Insurance coverage is difficult to obtain without remediation (either full copper replacement or approved aluminum-rated devices at every connection point — called "pig-tailing"). See our full aluminum wiring guide.
5. Kitec Plumbing
Installed between 1995–2007, Kitec plastic piping (identifiable by its orange hot-water and blue cold-water pipes) is subject to premature failure — fittings corrode and burst, causing catastrophic water damage. A class-action settlement fund existed but has expired. Replacement costs $3,000–$8,000 for a typical house. Many insurers will not cover homes with active Kitec. Full Kitec plumbing guide here.
6. Evidence of Mold (Especially Hidden)
Surface mold in a bathroom is usually cosmetic. Mold discovered in the attic, inside wall cavities, or in the HVAC system is a serious red flag indicating moisture problems that may not be fully visible. Mold remediation costs $2,000–$20,000+ depending on scope. More importantly, visible mold suggests moisture conditions that may be causing structural damage as well. ASADS recommends professional mold testing when evidence is found.
7. Asbestos-Containing Materials (Pre-1990 Homes)
Homes built or renovated before 1990 frequently contain asbestos in insulation, floor tiles, drywall compound, textured ceilings (popcorn), pipe insulation, and more. Intact asbestos is not an immediate health hazard, but if you plan to renovate — or if materials are already deteriorating — an asbestos inspection is essential. Disturbance of asbestos-containing materials requires licensed abatement contractors under Ontario regulations.
8. Failing or Aged Roof (Under 5 Years Remaining)
Roof replacement is one of the largest single expenses in home ownership — $8,000–$25,000+ depending on size and material. An inspector can assess visible shingle condition, flashing integrity, and estimate remaining service life. A roof with less than 5 years of life, missing flashing, or multiple layers of shingles (re-roofing over old shingles) is a significant capital expenditure that should factor heavily into your offer price.
9. Inadequate Attic Ventilation and Insulation
Poor attic ventilation causes moisture buildup in winter, leading to condensation, mold growth on the underside of the roof deck, and premature shingle deterioration. In Ontario's climate, this is one of the most consistently observed deficiencies. Combined with inadequate insulation (below current code R-60 for most Ontario zones), buyers can expect higher energy costs and eventual roof deck replacement.
10. Furnace or HVAC System at End of Life
Gas furnaces typically last 15–25 years. Central AC units last 10–15 years. An inspection that reveals an HVAC system that's 20+ years old, has cracked heat exchangers (a carbon monoxide risk), or hasn't been serviced in years is a significant finding. Furnace replacement costs $3,500–$7,000; full HVAC replacement $7,000–$15,000+.
11. Polybutylene or Lead Water Service Lines
Lead water service pipes (connecting the municipal water main to the house) are found in Toronto, Hamilton, and older Ontario municipalities in homes built before the mid-1950s. Lead pipes leach lead into drinking water — a serious health concern. Replacement costs $3,000–$8,000 and often requires coordination with the municipality. Some cities offer cost-sharing programs.
12. Unpermitted Additions and Renovations
Finished basements, added bathrooms, garage conversions, and structural modifications done without permits create serious problems: insurance claims may be denied, the work may not meet code, and municipalities can order demolition or bring-to-code remediation at the owner's cost. Inspectors flag work that appears newer than the home's original construction and may not match building standards.
13. Grading Sloping Toward the Foundation
Landscaping and soil that slopes toward rather than away from the foundation channels water directly against basement walls — a primary cause of chronic basement water infiltration. While grading correction alone is inexpensive ($500–$2,000), if it's been this way for years, the foundation, weeping tile, and basement interior may already have sustained damage requiring far more extensive remediation.
14. Sump Pump Issues or Missing Sump in High Water Table Areas
A sump pump that's old, lacks a battery backup, or is absent in an area with high water tables or a history of basement flooding represents real risk. Flooding events cost $10,000–$50,000+ in Toronto and GTA — and are becoming more frequent with increasing extreme rainfall events.
15. Evidence of Termites or Carpenter Ants
Mud tubes, hollow-sounding floor joists, coarse sawdust beneath structural members, or sagging floors can all indicate active wood-destroying insect activity. In southern Ontario — particularly Hamilton, Niagara, Windsor, and older Toronto neighbourhoods — termite presence is more common than most buyers expect. See our full termite guide for Ontario.
What to Do When Your Inspector Finds Red Flags
- Don't cancel immediately. Almost every home has some deficiencies. The severity and cost matter.
- Get specialist opinions. Your inspector identifies and flags — engineers, electricians, and contractors quantify cost and scope.
- Negotiate. Use findings to request price reductions, seller repairs, or closing credits.
- Know your walk-away threshold. If total remediation costs exceed your risk tolerance, it's a valid reason to exercise your inspection condition.
Book an ASADS pre-purchase home inspection across Ontario. Every inspection includes thermal imaging, detailed digital report, and same-day delivery. Call (647) 801-9311 or book online.